Now that everything is finished up on the inside of the machine, we need to connect all of our external devices such as the keyboard, mouse, and monitor.
- If you still have the monitor connected from before on our quick power up test great! If not, go ahead and connect it to the video port on the video card now. If you have onboard video this will be mixed in with the other I/O ports on the back of the case, and if you installed it seperately to a slot it will be farther down in the back.
- Connect the keyboard, mouse, and speakers to the matching I/O ports on the back of the case. Many times these are color coded so it makes it easier to connect. They are also labeled next to the ports with a mouse symbol for mouse, keyboard for keyboard etc.
- Depending on how you plan on connecting to the internet, either connect the phone line to your modem OR connect the network cable that runs from you cable modem, DSL modem, or wireless router to the network port on the back of your computer. It will be the port that looks similar to a phone jack, just slightly larger.
- If you bought a scanner or printer, you can go ahead and connect it now, since Windows will detect and set the drivers for you when you run installation for the first time.
With everything attached to the inside and the outside of your new computer, we are ready to try and do a full boot test for the first time. Keep the side off the case so we can make sure everything is functioning properly, and troubleshoot if necessary.
0 comments:
Post a Comment
Only Polite comment will appear!!!